Description
 |
| • Superparticel fluric resin combined with special ceramic binder shows thermal resistance and high cohesion. • Excellent adhesion to iron, aluminum, copper, ceramics and glass • Cured film featured by excellent release, lubrication, anticorrosion and antiabrasion • Cured film featured by excellent water repellency, oil repellency and chemical resistance |
 |
| • The products coats fluoric resin to iron, aluminum, copper, cermaic and glass. • It is used for release, lubrication, anticorrosion, chemical resistance and solvent resistance. • Ideal for laboratory, food factory and medicine factory where solvent type antirust agent, grease and silicone can not be used. • Optimal lubrication environment for application requiring thermal resistance |
 |
| • Degrease target surface with NABAKEM DC-5000, MC-2, PMC-3 etc. for high adhesion. • Shake it well before spraying it evenly with 20 ∼ 30cm away from target. • Keep it dried for 30 ∼ 60 minutes at normal temperature. • Cure it by heating. • Recommended heating tempeature and time : 130℃-24 hr, 175℃-60 min, 200℃-15 min, 250℃-10 min. |
 |
| • Use it in the well-ventilated place. • Do not use it to human body. • Keep it in the cool place below 40℃. |
