Description
| Spatter created when welding makes adverse effects on product finishing and exfoliates coating after product finishing. Sanding, grinding or chisel has been used for removing spatter or unstable anti-adhesive agent has been used. However, SPAZERO became an essential product at the welding workplace where required increasing a productivity through a quality improvement, cost reduction and working environment improvement.
• Excellent effect of preventing weld-spatter.(Maintains favorable effect even after 1month) • Not affecting the work of welding. • Superior application and durability. • No offensive smell : working condition is clean, and fast drying(10~20min) • Painting can be done without removing the coated film. |
| Antispatter agent for iron and nonferrous metals |
| • Degrease or remove foreign substances. Apply it.
• Apply it thinnly and evenly on the welding target area by using spray or brush before doing welding. • It does not matter that you do welding immediately after application. It is more effective to do welding after checking tack free drying. • If you apply it temporarily onto welding area of whole machining object and weld it for one month under work process, spatter does not adhere to it. |
| • Do not use it toward fire.
• Do not use near heater or stove. • Do not use in the room using fire. • Do not keep it in the place above 40℃. • Provide ventilation when use in the closed room. • Do not throw it away into fire. • Punch the can before throw it away. • Do not keep it in the closed place. • Spraying may not work well below 5℃. • After welding, user must have a self-test and then decide to use the product if there is post-processing such as painting. (In case of plating, you go on plating after remove of solvent. |
