Description
 |
| NABAKEM F-23 that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the parts. Will not interfere with secondary operations such as decorating, bonding, or painting.
• Nonflammable |
 |
| • Thermoplastics and Thermoset resins • Epoxy, Phenol, PE, DAP etc. • Natural & Synthetic Rubbers |
 |
| • It may be applied to hot or cold molds by spraying, wiping or brushing. • Spraying with a fine mist is preferable because it eliminates wipe or brush marks and results in the smoothest finish with the fastest drying time. • Polish wet with a 100% cotton cloth if high gloss is desired on molds. |
 |
| • Do not keep it in the place above 40℃. • Provide ventilation when use in the closed room. • Do not throw it away into fire. • Do not keep it in the closed place. |
